Ballistic Helmet Test Reports

The ballistic helmets we sell have been tested by three independent ballistic laboratories in the USA, Poland and Ukraine. Exfil FAST helmets stopped NIJ Level IIIA handgun rounds (.44 Magnum, .357 SIG and 9 mm) with no penetration at NTS Labs in the USA, while FAST helmets met DSTU 8835:2019 Class 1 in Ukraine and reached a fragmentation V50 of up to 698.8 m/s in Poland.

  • 3 independent laboratories in 3 countries
  • 2 helmet models tested: FAST and Exfil FAST
  • Most recent test: December 2025

Test Results Summary

#

Helmet

Laboratory

Standard

Result

Report

1

Exfil FAST, size L

NTS Labs, Wichita, USA

Modified NIJ 0106.01, NIJ Level IIIA threats

No penetration, 16 hits after wet conditioning: .44 Magnum, .357 SIG, 9 mm

NTS Record BTG2101, January 2026

2

Exfil FAST, size L

NTS Labs, Wichita, USA

NATO STANAG 2920

Fragmentation V50: 659.8 m/s

NTS Record BTG2101, January 2026

3

FAST high cut, size M-L

MORATEX Ballistic Laboratory, Poland

NATO STANAG 2920

Fragmentation V50: 695.2 and 698.8 m/s

Report No. 011/2025U, March 2025

4

FAST, size L

State Research Institute of the MIA of Ukraine

DSTU 8835:2019

No penetration: 9 mm Luger and 9 mm PM, 10 hits. Class 1

Protocol No. 20.406, July 2023


Which Report Covers My Helmet?

  • Exfil FAST helmets and Exfil helmet kits: tests 1 and 2.
  • FAST helmets and FAST helmet kits: tests 3 and 4.

Test Details

NTS Labs, USA: Exfil FAST, NIJ Level IIIA threats and STANAG 2920

  • Laboratory: NTS Labs, Wichita, Kansas, USA. Record BTG2101, issued 24 January 2026; tests carried out on 7 December 2025.
  • Samples: five Exfil Ballistic FAST SHC helmets, size L, 1.36–1.37 kg, tested complete with retention system, chinstrap and pads.
  • Method: modified NIJ 0106.01 helmet penetration test with Level IIIA ammunition from NIJ 0108.01 and NIJ 0101.06. Helmets were wet-conditioned before testing; four hits per helmet (front, back, left, right) at 0°.

Round

Velocity

Hits

Penetrations

.44 Magnum 240 gr LSWC-GC

412–434 m/s

4

0

.44 Magnum 240 gr JHP

427–431 m/s

4

0

9 mm 124 gr FMJ RN

412–439 m/s

4

0

.357 SIG 125 gr TMJ

447–459 m/s

4

0

Fragmentation: NATO STANAG 2920 (Edition 2), 1.1 g (17 gr) fragment simulating projectile, helmet shell at ambient conditions. V50: 659.8 m/s.

MORATEX, Poland: FAST High Cut, STANAG 2920

  • Laboratory: Ballistic Laboratory of the Institute of Security Technologies MORATEX, Łódź, Poland, accredited by the Polish Centre for Accreditation (AB 155). Report No. 011/2025U; tested on 25 February 2025.
  • Samples: two high cut helmets, size M-L, 1,518 g and 1,526 g.
  • Method: NATO STANAG 2920 with a 1.1 g (17 gr, .22 cal) fragment simulating projectile after 24 hours of conditioning at 20 ± 2 °C and 65 ± 5% humidity.
  • Result: V50 of 2 m/s and 698.8 m/s.

State Research Institute of the MIA of Ukraine: FAST, DSTU 8835:2019

  • Laboratory: Testing Department of the State Research Institute of the Ministry of Internal Affairs of Ukraine, Kyiv, accredited to ISO/IEC 17025 by the National Accreditation Agency of Ukraine. Protocol No. 20.406; tested on 18–19 July 2023.
  • Samples: two FAST helmets, size L, UHMWPE shell, 1.572 kg and 1.596 kg, shell thickness 10.5–10.9 mm.
  • Method: DSTU 8835:2019, ballistic barrel at 5 m.

Round

Velocity

Hits

Penetrations

9 mm Luger FMJ RN, 8.0 g

363–369 m/s

5

0

9 mm PM (57-N-181S), 5.9 g

338–347 m/s

5

0

Result: protection Class 1 according to DSTU 8835:2019.

What the Standards Mean

  • NIJ 0106.01 is the US test method for ballistic helmets. NIJ does not certify helmets, so “Level IIIA” on a helmet means it was tested against the Level IIIA handgun threats from NIJ 0108.01 and 0101.06: 9 mm FMJ, .44 Magnum and .357 SIG.
  • NATO STANAG 2920 measures fragmentation protection. V50 is the velocity at which a 1.1 g (17-grain) fragment simulator has a 50% chance of penetrating the helmet; the higher the V50, the better the protection against shrapnel.
  • DSTU 8835:2019 is the Ukrainian standard for bulletproof helmets. Class 1 covers 9 mm handgun rounds, including the 9×18 mm PM used in Makarov and Stechkin pistols.

How to Read a Helmet Test Report

  • Check the model and size. A report applies only to the helmet model, size and configuration that were tested.
  • Check the laboratory. Look for the lab name, address, report number, date and accreditation.
  • Check the threats and velocities. “Level IIIA” means little without the exact rounds and impact velocities.
  • Penetration and V50 are different tests. Penetration shows whether bullets were stopped; V50 shows fragment protection.

Download the Test Reports (PDF)

  1. NTS Labs Record BTG2101 — NTS Labs, Wichita, USA, January 2026 (PDF, English)
  2. Test Report No. 011/2025U — MORATEX Ballistic Laboratory, Poland, March 2025 (PDF, English)
  3. Protocol No. 20.406 — State Research Institute of the MIA of Ukraine, July 2023 (PDF, Ukrainian)


Frequently Asked Questions

Are your ballistic helmets NIJ certified?

NIJ does not certify helmets. Our Exfil FAST helmets were tested by NTS Labs (USA) to a modified NIJ 0106.01 protocol against NIJ Level IIIA threats, with no penetration.

Which rounds were stopped in the tests?

Exfil FAST helmets stopped .44 Magnum, .357 SIG and 9 mm FMJ at NTS Labs. FAST helmets stopped 9 mm Luger and 9 mm PM in the Ukrainian DSTU 8835:2019 test.

What is the fragmentation V50 of your helmets?

FAST high cut helmets reached 695.2 and 698.8 m/s at MORATEX (Poland); Exfil FAST helmets reached 659.8 m/s at NTS Labs (USA). Both tests used a 1.1 g (17 gr) fragment simulator under STANAG 2920.

Will a Level IIIA helmet stop rifle rounds?

No. Level IIIA helmets are designed for handgun rounds and fragments, not rifle rounds such as 5.56×45 mm or 7.62×39 mm.

Were the helmets tested wet?

Yes. NTS Labs tested Exfil FAST helmets after wet conditioning, with retention system, chinstrap and pads installed.

Good to Know

  • Results apply only to the tested models, sizes and configurations listed above.
  • Laboratory results reflect controlled conditions; real-world performance may vary.

This page was prepared by the BlenderTac team from the original laboratory reports. Last updated: 19.11.2026.

Questions about the tests? Email us at support@blendertac.com and our team will answer.